Redwood top help

Wood choice logic, brace shapes, braces patterns -- what and why for the "heart of the guitar"
Post Reply
Paul C
Posts: 416
Joined: Sun Dec 18, 2011 3:50 pm

Redwood top help

Post by Paul C » Sat Jun 04, 2016 3:32 pm

I'm thinking this top is similar to cedar. I was looking for the General rule posting on thicknessing tops but can't seem to find it I know I read it somewhere here a while back.
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Redwood top help

Post by ken cierp » Sat Jun 04, 2016 4:08 pm

10% thicker than Sitka Spruce
Top
Kevin in California
Posts: 2795
Joined: Mon Dec 19, 2011 4:19 pm

Re: Redwood top help

Post by Kevin in California » Sat Jun 04, 2016 11:58 pm

Paul, the redwood top I've just put on my current OM build I thicknesses to .110 inch.
Seemed just right. The top now has a very nice tap tone.
Top
Paul C
Posts: 416
Joined: Sun Dec 18, 2011 3:50 pm

Re: Redwood top help

Post by Paul C » Sun Jun 05, 2016 10:25 am

Ok guys thanks for the feedback
Top
Paul C
Posts: 416
Joined: Sun Dec 18, 2011 3:50 pm

Re: Redwood top help

Post by Paul C » Thu Jun 16, 2016 7:00 pm

I got carried away with finish sanding my rosette and took the soundhole area down to .095 while the outer rim is at .110. My stupidity. Learning as I go. Could or should I continue building this dred or start over with a new top. Any suggestions welcome.
Top
Kevin in California
Posts: 2795
Joined: Mon Dec 19, 2011 4:19 pm

Re: Redwood top help

Post by Kevin in California » Thu Jun 16, 2016 7:39 pm

I think you will be okay. If you are concerned about support at the sound hole, glue a surround underneath like you would see on many classicals. There is no sound production to speak of in this area anyway, so stiff is okay
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Redwood top help

Post by ken cierp » Thu Jun 16, 2016 7:58 pm

No harm, no foul -- carry on
Top
Post Reply

Return to “Sound-Boards (tops)”