Check it out

Dave Bagwill · Post by **Dave Bagwill** » Fri Sep 12, 2014 9:41 pm

I can't tell if the back part of this bridge is resting on the top or not. Can you?

ken cierp · Post by **ken cierp** » Fri Sep 12, 2014 10:03 pm

I believe it is -- also I think I saw that bridge design somewhere else and it was strung with the ball end in the slot and the string wrapped around back up to the adjustable saddle. Something like the "Badass" electric guitar bridge tail piece combo.

John Parchem · Post by **John Parchem** » Fri Sep 12, 2014 11:07 pm

Seems like it would work even with a pegged bridge. I do not think I would do it.

Dave Bagwill · Post by **Dave Bagwill** » Fri Sep 12, 2014 11:11 pm

I don't like it at all, but it really looked to me like that back portion is not glued to the top. But that would be very odd.

Lee in UK · Post by **Lee in UK** » Sat Sep 13, 2014 3:33 am

I wonder what stops the mini saddles from sliding forward when the strings are tensioned?

Dave Bagwill · Post by **Dave Bagwill** » Sat Sep 13, 2014 10:59 am

Good question Lee. It looks like a complicated mess to me.

peter havriluk · Post by **peter havriluk** » Sat Sep 13, 2014 2:08 pm

The picture that I see does not show the bridge/soundboard joint. Runs out of bridge at the bottom.

Acoustic Guitar Construction

Check it out

Check it out

Re: Check it out

Re: Check it out

Re: Check it out

Re: Check it out

Re: Check it out

Re: Check it out