Thanks, I'll be looking for something like this then....
I'll check the local H/W stores. Thanks, Ken.
Dental burrs
-
Kevin in California
- Posts: 2772
- Joined: Mon Dec 19, 2011 4:19 pm
Re: Dental burrs
I am using these little guys with my dremel. I bout a set of collets at Home Depot, and there is one small enough in there for these little burrs. My wife's cousin is a dentist and he has given me a nice collection. One of them makes the trough for the .030" BWB purfling perfectly...a little fuzzy at the top of the rout, but nothing that doesn't sand away.
Kevin
Kevin
-
Rienk Ayers
- Posts: 66
- Joined: Fri Nov 30, 2012 4:01 pm
Re: Dental burrs
I've used these in the past as well.
My dad is a veterinarian and did some animal dentistry - I just used the air tool that he gave me. I recommend an air die-grinder over the dremmel, as it can get a much higher rpm, which these bits like - much cleaner cuts. YMMV.
My dad is a veterinarian and did some animal dentistry - I just used the air tool that he gave me. I recommend an air die-grinder over the dremmel, as it can get a much higher rpm, which these bits like - much cleaner cuts. YMMV.