Page 2 of 5
Re: A Manzanita Local Wood Parlor
Posted: Fri Jan 30, 2026 2:09 pm
by Carl Dickinson
Yes, Kevin. I've never gotten a handle on hot hide.
Thanks, Peter.
Re: A Manzanita Local Wood Parlor
Posted: Fri Jan 30, 2026 4:32 pm
by Will Reyer
Oh! Oh! I love it! LOCAL LUMBER, wunnerful, wunnerful...
Outstanding craftsmanship and fixtures. Pine soundboard grain is pretty wide, but I think it'll work fine. I built my #7 with white pine, similar big grain. It was ladder braced so couldn't actually compare the pine top with my other guitars, all X braced, but it worked fine.
Please, please, PLEASE make a sound file when you get it played in. Acoustic, not plugged into an amp even though you will be able to.
Thank you for posting this.
Re: A Manzanita Local Wood Parlor
Posted: Sat Jan 31, 2026 2:00 pm
by Dude13
I had the idea of installing the UTB to the sides before gluing the top on but have never tried it. I’ve never seen it done anywhere. How common is this method? Any pro’s and con’s?
Re: A Manzanita Local Wood Parlor
Posted: Sat Jan 31, 2026 3:49 pm
by Carl Dickinson
It's the first time I've tried it. Seemed like a good idea since the UTB is flat and the sides have been sanded flat from neck end to soundhole after sanding the top edge in a 30' sanding dish. Also it was easier to ensure that the neck block extension/UTB joint was tight.
Re: A Manzanita Local Wood Parlor
Posted: Sat Jan 31, 2026 6:28 pm
by Dude13
Exactly! Getting the neck block and UTB joint perfect seems easier that way too.
Re: A Manzanita Local Wood Parlor
Posted: Fri Feb 06, 2026 9:55 pm
by Carl Dickinson
BMB purfing glued to binding.
- manz16.jpg (88.02 KiB) Viewed 1808 times
Binding channels cut. I'll put a description of the binding router set I put together in the tool section.
- manz17.jpg (80.92 KiB) Viewed 1808 times
Getting ready for taping. I use reinforced strapping tape split into 4.
- manz18.jpg (84.57 KiB) Viewed 1808 times
Ready for CA glue. Kevin does it this way too.
- manz19.jpg (77.9 KiB) Viewed 1808 times
Re: A Manzanita Local Wood Parlor
Posted: Fri Feb 06, 2026 11:23 pm
by Kevin in California
Nice progress Carl.
I've used the strapping tape too and it works really well. I'm out of it right now so I've still got some Stewmac binding tape to use up.
I just today started gluing BW purfling to EIR binding I cut from side scraps. I like this little guy you're building!!