Shoulder brace dimensions

Sequencing -- clamping schemes -- logic, do's and don'ts
Post Reply
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: Shoulder brace dimensions

Post by Dave Bagwill » Tue May 28, 2019 8:38 pm

We had a short discussion on the flat/not flat thing a while back. There are a couple of opinions here:
viewtopic.php?f=11&t=3042
-Under permanent construction
Top
Tim Benware
Posts: 1489
Joined: Thu Dec 22, 2011 1:22 pm
Location: Asheboro, NC

Re: Shoulder brace dimensions

Post by Tim Benware » Tue May 28, 2019 9:15 pm

Gluing it flat will save you a whole lot of aggravation especially if this is your first.
I've "Ben-Had" again!
Tim Benware
Creedmoor, NC
Top
Cricket
Posts: 4
Joined: Sat Jun 01, 2013 8:52 am

Re: Shoulder brace dimensions

Post by Cricket » Wed May 29, 2019 8:05 am

Thanks again guys. I will remove the index fans and glue flat...More to come I am sure.
Cricket
Top
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: Shoulder brace dimensions

Post by Dave Bagwill » Wed May 29, 2019 9:59 am

Questions are good.
-Under permanent construction
Top
Post Reply

Return to “Putting it all together”