I have always loved the 000-12 fret. I own a Martin 000-28 12 fret from a limited run in 1996. What a sweet instrument. I thought it was time I built one. I am also wanting to try some new things. I'm using a torrefied spruce top with Indian laurel back and sides, Adarondack bracing and fish glue with long clamp times where the top is concerned. The indian laurel is dense but I think will be a great tone wood and should finish great.
This is how I have made my last three molds now. 1 1/2 poplar and 1/4 birch plywood. It is light and strong enough.
I have had to repair some braces on Gibson and Martin that just weren't glued well. I like to see some glue squeeze out!
000-12 fret
-
Kenny Wiebusch
- Posts: 105
- Joined: Wed Mar 06, 2019 11:39 pm
- Location: Southeast Texas
000-12 fret
- Attachments
-
- IMG_1563.JPG (163.35 KiB) Viewed 854 times
-
- IMG_1565.JPG (142.7 KiB) Viewed 854 times
-
- IMG_1561.JPG (151.41 KiB) Viewed 854 times
-
- IMG_1559.JPG (134.1 KiB) Viewed 854 times
-
John Parchem
- Posts: 2749
- Joined: Fri Dec 23, 2011 8:33 pm
- Location: Seattle
- Contact:
Re: 000-12 fret
Nice, I am just starting to close up a 12 fret 00.
-
banjopicks
- Posts: 21
- Joined: Thu May 10, 2018 7:02 am
Re: 000-12 fret
I really like your mold. I can't help but think it was difficult to align though. The savings in materials at todays prices make this look like a good option if I ever stray from the almighty dreadnought.