Jeremy
Herman in the Netherlands made this guitar a couple years ago.
Let's see if he answers your questions.
Jumbo Spruce/Padouk
Re: Jumbo Spruce/Padouk
Hi Jeremy,
Nothing special happened to the Padouk of this guitar. I filled the (large) pores 3 times with Z-Poxy, and sealed that with shellac. And the finish is just clear nitro.
The guitars I made with Padouk were all stunning bright red/orange in the beginning. But over time a brownish hue came over them. I think you cannot avoid that, but the wood is still beautiful though. Here you find some other pictures:
https://www.hermanarendsenguitars.nl/39 ... adouk.html
BTW: you might think I manipulated the colors of the pictures, but I did not. The Padouk was as flashy as it is shown.
Good luck, Herman
Nothing special happened to the Padouk of this guitar. I filled the (large) pores 3 times with Z-Poxy, and sealed that with shellac. And the finish is just clear nitro.
The guitars I made with Padouk were all stunning bright red/orange in the beginning. But over time a brownish hue came over them. I think you cannot avoid that, but the wood is still beautiful though. Here you find some other pictures:
https://www.hermanarendsenguitars.nl/39 ... adouk.html
BTW: you might think I manipulated the colors of the pictures, but I did not. The Padouk was as flashy as it is shown.
Good luck, Herman
-
Jeremydawg
- Posts: 2
- Joined: Sun Jul 30, 2023 11:42 pm
Re: Jumbo Spruce/Padouk
Thanks Herman I’m going to try doing that
Wish me luck
. Jeremy