Cracked top

Wood choice logic, brace shapes, braces patterns -- what and why for the "heart of the guitar"
Post Reply
Paul C
Posts: 416
Joined: Sun Dec 18, 2011 3:50 pm

Cracked top

Post by Paul C » Sat Jan 29, 2022 2:18 pm

Any advice on how to go about fixing. I was being lazy about humidifying. I can can shine light right through it. As always thanks guys.
Attachments
F7AC1980-F081-4A91-A2DF-B281B57F967F.jpeg
F7AC1980-F081-4A91-A2DF-B281B57F967F.jpeg (467.28 KiB) Viewed 1831 times

John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Cracked top

Post by John Parchem » Sat Jan 29, 2022 2:37 pm

You might be able to hydrate the guitar to close the crack. I live in the PNW so I do not see guitars like that. I have seen repair technicians hang the guitar in a garbage bag with a wet sponge at the bottom of the bag. Wait a week or so. If the crack closes tight work some titebond into the crack, I have seen slightly diluted titebond and the use of small suction cups to help force the glue into the crack. To keep the crack level you can use repair magnets. Generally repair techs will glue a few cleats along the cracks in the guitar to keep it closed.

Herman
Posts: 1670
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:

Re: Cracked top

Post by Herman » Sun Jan 30, 2022 4:26 am

Ugly crack Paul,

If John's way dos not help you, you can try to cut a wedge shape out of the crack and fill it with a matching spruce wedge.
And level and color it after that.
It will show, but it will be structural solid.
Herman

Paul C
Posts: 416
Joined: Sun Dec 18, 2011 3:50 pm

Re: Cracked top

Post by Paul C » Sun Jan 30, 2022 5:00 pm

Ok sounds good guys I’ll start with a bag and sponge see what happens .

John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Cracked top

Post by John Parchem » Sun Jan 30, 2022 11:22 pm

Paul C wrote: Sun Jan 30, 2022 5:00 pm Ok sounds good guys I’ll start with a bag and sponge see what happens .
Here is the same idea from both me and Herman.


Post Reply