How I do the 8 degree angle thing for the slothole

Materials used - making - placing - gluing to the sound-board <-----<<< got to get this right!
Post Reply
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

How I do the 8 degree angle thing for the slothole

Post by Dave Bagwill » Mon Dec 04, 2017 7:21 pm

Pretty simple actually. That a 1/8" downspiral carbide bit from BAM. At high revs it cut beautifully.
Attachments
DSC00050.JPG
DSC00050.JPG (140 KiB) Viewed 2670 times
-Under permanent construction
Top
John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:
Contact John Parchem

Re: How I do the 8 degree angle thing for the slothole

Post by John Parchem » Mon Dec 04, 2017 7:23 pm

Cool jig!
Top
Herman
Posts: 1674
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:
Contact Herman

Re: How I do the 8 degree angle thing for the slothole

Post by Herman » Tue Dec 05, 2017 10:30 am

Jeee Dave, angles, angles, angles!
Good for you the bottom of the slot does not need to be curved.

Anyway, nice solution
Herman
Top
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: How I do the 8 degree angle thing for the slothole

Post by Dave Bagwill » Tue Dec 05, 2017 12:28 pm

I'm gonna license the idea to WalMart and make tens of dollars!!!! lol
-Under permanent construction
Top
Post Reply

Return to “Bridges”