A scraper for binding and purfs

Selection of materials -- wood -- plastic -- routing the channels etc.
Post Reply
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

A scraper for binding and purfs

Post by Dave Bagwill » Fri Nov 16, 2012 5:42 pm

Using a small sharp scraper blade (shown) or a razor blade - easy to adjust for binding or purfs or both, aligns with the sides, probably better made with BRW and HHG, but you do what you can :-)
Attachments
DSC00571.JPG
DSC00571.JPG (127.72 KiB) Viewed 841 times
-Under permanent construction
Top
TonyinNYC
Posts: 1510
Joined: Sat Dec 17, 2011 9:00 pm

Re: A scraper for binding and purfs

Post by TonyinNYC » Fri Nov 16, 2012 6:08 pm

Nifty!
Top
Tim Benware
Posts: 1489
Joined: Thu Dec 22, 2011 1:22 pm
Location: Asheboro, NC

Re: A scraper for binding and purfs

Post by Tim Benware » Fri Nov 16, 2012 6:23 pm

Me likes. Me can do dat.
I've "Ben-Had" again!
Tim Benware
Creedmoor, NC
Top
Kevin in California
Posts: 2795
Joined: Mon Dec 19, 2011 4:19 pm

Re: A scraper for binding and purfs

Post by Kevin in California » Fri Nov 16, 2012 7:09 pm

Most clever.....but don't cut yourself Dave.

Kevin
Top
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: A scraper for binding and purfs

Post by Dave Bagwill » Fri Nov 16, 2012 7:20 pm

That ship already sailed, Kevin - thus the blue tape along the top edge..
-Under permanent construction
Top
Post Reply

Return to “Bindings and Purfling”