Dave's 2nd Build: A KMG J-200

[dave d]

Hello all!
In the summer I decided it was time to order another of Ken's great kits, this time the Gibson J-200.

I've loved the shape of the J-200 ever since I held one back in the day, and a friend took this photo of me:

EP_J200.jpg (38.45 KiB) Viewed 1804 times

Okay, so it isn't really me, but hopefully my guitar, once complete, will look similar to that one.

I received the kit about 2 weeks ago, and here's a few photos of the box contents, all very nicely packaged for shipping.

A great looking neck, back , sides, and top!

2012-09-08.jpg (59.25 KiB) Viewed 1777 times

And the rest of the components:

2012-09-081.jpg (56.6 KiB) Viewed 1777 times

Wow - I should have such a nice mustache.

So stay tuned, more pics to come as I progress. And for those of you who I will pester frequently with questions that will cause you to grimace, I apologize in advance and thank you for your patience. Again.

[dave d]

Hi again...

Here are some photos of what I've done so far.

After the mold has been set up with the template, I mark the sides at the centre line for cutting.

DBD_6052.JPG (100.68 KiB) Viewed 1772 times

Sides now cut to length.

DBD_6056.JPG (91.28 KiB) Viewed 1772 times

Gluing the neck block and tail block.

DBD_6076.JPG (70.36 KiB) Viewed 1772 times

Wetting the kerfing and temporarily clamping it to the outside of the rim for ease of gluing to the inside later.

DBD_6082.JPG (89.45 KiB) Viewed 1772 times

Gluing on the kerfing.

DBD_6088.JPG (112.55 KiB) Viewed 1772 times

Top kerfing done.

DBD_6092.JPG (62.33 KiB) Viewed 1772 times

and the bottom kerfing is on.

DBD_6106.JPG (100.86 KiB) Viewed 1772 times

Profiling the upper bout of the top edge.

DBD_6127.JPG (72.9 KiB) Viewed 1772 times

Preparing the bottom for contouring by marking the neck and tail blocks.

DBD_6128.JPG (89.67 KiB) Viewed 1772 times

Using a plane to trim most of the excess block.

DBD_6135.JPG (70.25 KiB) Viewed 1772 times

To be continued...

[dave d]

More...

Rim edge and neck block after using the rotating radius bar.

DBD_6146.JPG (51.92 KiB) Viewed 1772 times

Checking the fit of the abalone rosette

DBD_6193.JPG (85.13 KiB) Viewed 1772 times

remove the abalone and purfling strips, and then seal the channel with lacquer. Once dry, replace the pieces and flood with CA.

DBD_6195.JPG (89.88 KiB) Viewed 1772 times

Time for some scraping and sanding

DBD_6205.JPG (111.59 KiB) Viewed 1772 times

Rosette looking pretty good!

2012-09-16.jpg (159.48 KiB) Viewed 1772 times

Time to get some sleep...

[Dave Bagwill]

This is fun to follow, Dave, thanks for posting!

[ken cierp]

Excellent documentation -- premo photography !!!

[Kevin in California]

Bee Ute IFUL work so far.
Keep the pics coming.

Kevin

[Tim Benware]

Yes, very good keep it going.