Finishing School

Spray booths -- Holding fixtures -- Work space
Forum rules
The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to forward information, share experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed. The “Acoustic Guitar Construction Forum” is owned by Kenneth Michael Guitars and is copy protected. Direct links to luthier suppliers are not permitted and will be edited.
Post Reply
Tim Benware
Posts: 1489
Joined: Thu Dec 22, 2011 1:22 pm
Location: Asheboro, NC

Finishing School

Post by Tim Benware » Tue Aug 28, 2012 5:58 pm

I would like to get better by attending a "hands on" school on finish spraying. Does anyone know of one? The only one I can find is this one:

http://www.binks.com/Resources/Training ... fault.aspx
I've "Ben-Had" again!
Tim Benware
Creedmoor, NC
Top
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: Finishing School

Post by Dave Bagwill » Tue Aug 28, 2012 7:37 pm

I'm with you, Tim. If I could spend a couple of days getting it down, under a pro so that I could repeat it when I got home, it would be worthwhile.
-Under permanent construction
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Finishing School

Post by ken cierp » Tue Aug 28, 2012 8:00 pm

I would suggest contacting Reranch guitar finishing -- they may have a course or pehaps point you in the right direction.
Top
Post Reply

Return to “Finishing rooms and equipment”