Hammer Veneering and more
Posted: Wed Dec 21, 2011 1:19 am
I was ask to come over and post this info. I hope this is the correct area.
While this is not an endorsement for "Veneering" Per Si, there are some interesting ideas here about a lot of useful things that may or may not include head plate installation.
I am working and practicing on "String inlay" for my Dulcimer and have plans to use it on my guitars as well.
Craftsmanship with old tools and little money is right up my line, I hope some of you can enjoy it as well.
[Ken, thanks for this site. It has a great comfortable feel with a LOT of useful information, I wish you much success with your endeavor.] Ray
In the 17Th and 18Th Century there were no "Vacuum Bags" but creating a vacuum was nothing new and it was done with the simplest tools, long before electricity or vacuum pumps were invented, and WITHOUT CLAMPS of any kind.
Since I'm pretty much confined to bed now, I've been studying some of the old ways of doing things, (Mother has even let me practice some of it on a tray she's put together so I can use glue in bed w/o gluing my....huhhhh SELF to the bed..hahahaha!)
Anyway, back to the subject, if you aren't familiar with the term "Hammer Veneering" it isn't at all what it sounds like. It works. It's simple and doesn't take $100's of dollars worth of tools to accomplish great looking results.
So if you have difficulty with the veneer or head plates this may be the answer.
I can explain it all day but as usual, a picture is worth a 1000 words...so watch this VID and it pretty much says it all...Take a look and think about all the possibilities...sometimes, old simple ways are better.
Take the time to look around this site, there's a LOT of information here and many vids that may be useful in one form or another.
Ray
http://woodtreks.com/category/technique ... marquetry/
While this is not an endorsement for "Veneering" Per Si, there are some interesting ideas here about a lot of useful things that may or may not include head plate installation.
I am working and practicing on "String inlay" for my Dulcimer and have plans to use it on my guitars as well.
Craftsmanship with old tools and little money is right up my line, I hope some of you can enjoy it as well.
[Ken, thanks for this site. It has a great comfortable feel with a LOT of useful information, I wish you much success with your endeavor.] Ray
In the 17Th and 18Th Century there were no "Vacuum Bags" but creating a vacuum was nothing new and it was done with the simplest tools, long before electricity or vacuum pumps were invented, and WITHOUT CLAMPS of any kind.
Since I'm pretty much confined to bed now, I've been studying some of the old ways of doing things, (Mother has even let me practice some of it on a tray she's put together so I can use glue in bed w/o gluing my....huhhhh SELF to the bed..hahahaha!)
Anyway, back to the subject, if you aren't familiar with the term "Hammer Veneering" it isn't at all what it sounds like. It works. It's simple and doesn't take $100's of dollars worth of tools to accomplish great looking results.
So if you have difficulty with the veneer or head plates this may be the answer.
I can explain it all day but as usual, a picture is worth a 1000 words...so watch this VID and it pretty much says it all...Take a look and think about all the possibilities...sometimes, old simple ways are better.
Take the time to look around this site, there's a LOT of information here and many vids that may be useful in one form or another.
Ray
http://woodtreks.com/category/technique ... marquetry/