Hi guys,
I have a Adirondack spruce soundboard that I discarded from my first build because I thicknessed it too thin and unequally. Some spots are around 0.085 in. I think we're usually looking for 0.10 to 0.125 right? So my question is, is it still usable and can I compensate with stiffer braces?
Thin soundboard
-
- Posts: 53
- Joined: Tue Jul 11, 2023 8:13 am
- Location: La Pocatière, Québec
-
- Posts: 2712
- Joined: Fri Dec 23, 2011 8:33 pm
- Location: Seattle
- Contact:
Re: Thin soundboard
make a classical or a ukulele! Too thin for a steel string. The braces will really telegraph through the top. Also the main voice of the guitar is the top, I will not spend all the time it takes to build a guitar and compromise on the top.
Re: Thin soundboard
Second that. It can be used for a very small guitar or a Maccaferri Gypsy one.
Or use it as a resource for central strips cutted cross grain.
Herman
Or use it as a resource for central strips cutted cross grain.
Herman
-
- Posts: 53
- Joined: Tue Jul 11, 2023 8:13 am
- Location: La Pocatière, Québec
Re: Thin soundboard
I didn’t know what a Maccaferri gypsy was. I looked it up and it’s a manouche jazz guitar right? I don’t quite understand why these could tolerate a thinner top.
I’m thinking of making a smaller guitar for my grandson.
I’m thinking of making a smaller guitar for my grandson.
Re: Thin soundboard
Excellent plan Geo
A maccaferri gypsy guitar has a 2 mm thick top. But is has a massive bracing below.
Here is the one I made:
A maccaferri gypsy guitar has a 2 mm thick top. But is has a massive bracing below.
Here is the one I made: