Workbench is done.
Posted: Mon Apr 11, 2016 11:30 am
I finished my bench yesterday, put a few coats of danish oil on it.
The bench ended up 66 1/2" long, 25 1/2" wide, and 37 1/2" tall. Made entirely of douglas fir two x fours, except the shelf below is yellow pine
The two vises are Grizzly cabinet makers vises. The quality is okay, especially for how I will be using them. I did not use hardwood for the wood jaws, just more DG here.
I will probably put some leather facing on them. I do still need to drill some 3/4" dog holes in the top, but will do that later.
Total cost to build, including the glue...$268, and A LOT of labor, but it was a fun process. The top is not pristine, but it is going to get banged and scraped anyway, right.
Thanks for watching along as I built it, hopefully I'll be back on the guitar build soon.
The bench ended up 66 1/2" long, 25 1/2" wide, and 37 1/2" tall. Made entirely of douglas fir two x fours, except the shelf below is yellow pine
The two vises are Grizzly cabinet makers vises. The quality is okay, especially for how I will be using them. I did not use hardwood for the wood jaws, just more DG here.
I will probably put some leather facing on them. I do still need to drill some 3/4" dog holes in the top, but will do that later.
Total cost to build, including the glue...$268, and A LOT of labor, but it was a fun process. The top is not pristine, but it is going to get banged and scraped anyway, right.
Thanks for watching along as I built it, hopefully I'll be back on the guitar build soon.