Page 1 of 1

fitting a Gibson style truss rod?

Posted: Thu Jan 08, 2015 5:17 pm
by mike-p
Anyone got any links/ ideas/ tips? I know they have to be angled in the neck but any idea on the angle? Headstock end adjustment. Thanks all,
Mike.

Re: fitting a Gibson style truss rod?

Posted: Thu Jan 08, 2015 6:46 pm
by ken cierp
The key is to get the rod close to the outer neck surface to make sure that thinner wood will bend -- not the fingerboard side. The later design has a bowed rod with a matching curve on the wood filler strip.

Re: fitting a Gibson style truss rod?

Posted: Fri Jan 09, 2015 5:02 am
by mike-p
http://www.es-335.org/wp-content/upload ... 24x678.png

Found the original patent plans which should help. Anyone use a headstock access truss rod?

Re: fitting a Gibson style truss rod?

Posted: Sat Jan 10, 2015 9:51 am
by ken cierp
Why not use a "more" modern truss rod? The owner will be appreciative, a trouble free TR is a comfort long term. $.02