I would like to see a short vid or at least some (many) good clear pictures of a bridge getting located, the finish scraped off, the bridge glued AND the glue clean-up with a real good look at the finish around the bridge when the glue is cleaned up. Sounds like a tutorial, and I suppose it is - with as much in-the-shop feel as possible.
My $.02
Tutorial/pictures
Materials used - making - placing - gluing to the sound-board <-----<<< got to get this right!
-
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Jump to
- Administration Messages
- AGCF is for friendly people -- Make sure you register using at least your real first name
- KMG Success Kit Assembly instructions
- Construction logs
- Gallery
- Shop Enviroment
- Hand Tools
- Power Tools
- Adhesives
- Specialized Guitar making tools and fixtures
- Materials Suitable for Acoustic Guitar Construction
- Side Bending
- Rosettes
- Sound-Boards (tops)
- Guitar Backs
- Voicing and Tap Tuning
- Rim Construction
- Neck Fabrication
- Putting it all together
- Pearl and Abalone
- Bindings and Purfling
- Neck Joint
- Fingerboards
- Bridges
- Preparation for finishing
- Finishing
- ↳ Nitro Lacquer
- ↳ Water Borne Finishes
- ↳ Shellac
- ↳ Tru Oil
- ↳ Finishing rooms and equipment
- Set-up
- Pick-ups and amplification
- Guitar construction book reviews
- "Shoot the Breeze"