A new heater in my shop!
Forum rules
The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to share information, experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed.
The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to share information, experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed.
-
Kevin in California
- Posts: 2824
- Joined: Mon Dec 19, 2011 4:19 pm
A new heater in my shop!
Wish I'd put this in years ago. Makes all the difference working in my shop on these cold days and evenings.
- Attachments
-
- 121513 002.JPG (189.9 KiB) Viewed 4051 times
-
Tim Benware
- Posts: 1489
- Joined: Thu Dec 22, 2011 1:22 pm
- Location: Asheboro, NC
Re: A new heater in my shop!
What? You want to be comfortable?
I've "Ben-Had" again!
Tim Benware
Creedmoor, NC
Tim Benware
Creedmoor, NC
-
Dave Bagwill
- Posts: 5952
- Joined: Tue Dec 13, 2011 7:44 pm
Re: A new heater in my shop!
Must be the day of the "heater" -- I hung up one of these this morning
Our annex is about 400 sq. ft. -- was using a propane unit (PIA). This little guy is 220 volts 20 amps with a thermostat -- pretty nice for the money. The shop is well insulated, the heater took it from 25 to 65 in about 2.5 hours. The fan is a little loud but really moves the warm air around.
Our annex is about 400 sq. ft. -- was using a propane unit (PIA). This little guy is 220 volts 20 amps with a thermostat -- pretty nice for the money. The shop is well insulated, the heater took it from 25 to 65 in about 2.5 hours. The fan is a little loud but really moves the warm air around.
ken cierp
http://www.kennethmichaelguitars.com/
Store Front
http://www.cncguitarproducts.com/
KMG Guitar Kit Information
http://www.kennethmichaelguitars.com/ki ... ckage.html
http://www.kennethmichaelguitars.com/
Store Front
http://www.cncguitarproducts.com/
KMG Guitar Kit Information
http://www.kennethmichaelguitars.com/ki ... ckage.html
Re: A new heater in my shop!
Good for you Kevin
-
Kevin in California
- Posts: 2824
- Joined: Mon Dec 19, 2011 4:19 pm
Re: A new heater in my shop!
Hey, I only did it so the glue could dry!!!!!!!!
-
Dave Bagwill
- Posts: 5952
- Joined: Tue Dec 13, 2011 7:44 pm