Four position holding fixture for brush on coatings

Spray booths -- Holding fixtures -- Work space
Forum rules
The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to forward information, share experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed. The “Acoustic Guitar Construction Forum” is owned by Kenneth Michael Guitars and is copy protected. Direct links to luthier suppliers are not permitted and will be edited.
Post Reply
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Four position holding fixture for brush on coatings

Post by ken cierp » Thu Jan 05, 2012 6:59 pm

This is a simple clamp that can be attached to the corner of a workbench -- locate the pivot bolt off center on the rotary clamp and it will securely pinch the bolt-on work handle.

Image
Image
Image
Image
Top
Post Reply

Return to “Finishing rooms and equipment”