Page 1 of 1
waterlox finish
Posted: Wed Jul 31, 2013 7:41 pm
by Paul C
Has anyone ever used waterlox wood finish.
Re: waterlox finish
Posted: Thu Aug 01, 2013 6:07 pm
by Ron Belanger
I use Waterlox for my necks and back of the headstock. I use a sealer coat, then sand the next two or three wet coats with 400 grit to fill the pores and finish up with 3 or 4 more coats all wiped on with a cloth and after the final coat dries, rub out with 0000 steel wool. silky smooth neck. For the headstock veneer, I have been using French Polish or the KTM SV that I spray the body with.