Blackwood Classical with an Adi top now with video.
Posted: Tue Jul 30, 2013 1:44 am
I strung the guitar up tonight and was finally able to play it. As always it sound bed at first, but I set the action, and cleaned up the top of the saddle allowed the string to stretch a bit so they could stay in tune at least part way through a tune and it sounds good.
This guitar has a red spruce top, African Blackwood back and sides with Tasmanian Blackwood bindings. The bridge is some sort of rosewood. The ebay seller called it Brazilian but it is not. In any case it was a nice looking piece of wood and when carved came is just above 25 grams. I also made the bridge 12 hole.
I also need to trim the saddle. The way it is now I can raise or lower the action a bit by sliding the bridge.
I still need to polish the top, I am just waiting a few days to let the finish cure.
Here are a few pictures. I will post a video but will wait till the weekend to film it.
This guitar has a red spruce top, African Blackwood back and sides with Tasmanian Blackwood bindings. The bridge is some sort of rosewood. The ebay seller called it Brazilian but it is not. In any case it was a nice looking piece of wood and when carved came is just above 25 grams. I also made the bridge 12 hole.
I also need to trim the saddle. The way it is now I can raise or lower the action a bit by sliding the bridge.
I still need to polish the top, I am just waiting a few days to let the finish cure.
Here are a few pictures. I will post a video but will wait till the weekend to film it.