Blackwood Classical with an Adi top now with video.

Post a few pictures of your "completed" project
John Parchem
Posts: 2750
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Blackwood Classical with an Adi top now with video.

Post by John Parchem » Tue Jul 30, 2013 1:44 am

I strung the guitar up tonight and was finally able to play it. As always it sound bed at first, but I set the action, and cleaned up the top of the saddle allowed the string to stretch a bit so they could stay in tune at least part way through a tune and it sounds good.

This guitar has a red spruce top, African Blackwood back and sides with Tasmanian Blackwood bindings. The bridge is some sort of rosewood. The ebay seller called it Brazilian but it is not. In any case it was a nice looking piece of wood and when carved came is just above 25 grams. I also made the bridge 12 hole.

I also need to trim the saddle. The way it is now I can raise or lower the action a bit by sliding the bridge.

I still need to polish the top, I am just waiting a few days to let the finish cure.

Here are a few pictures. I will post a video but will wait till the weekend to film it.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by John Parchem on Sat Aug 03, 2013 7:23 pm, edited 1 time in total.

Paul C
Posts: 416
Joined: Sun Dec 18, 2011 3:50 pm

Re: Blackwood Classical with an Adi top My #11 guitar.

Post by Paul C » Tue Jul 30, 2013 10:18 am

Very nice guitar.

Kevin in California
Posts: 2806
Joined: Mon Dec 19, 2011 4:19 pm

Re: Blackwood Classical with an Adi top My #11 guitar.

Post by Kevin in California » Tue Jul 30, 2013 10:57 am

She turned out beautiful John.

Kevin

Herman
Posts: 1689
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:

Re: Blackwood Classical with an Adi top My #11 guitar.

Post by Herman » Wed Jul 31, 2013 9:24 am

Sweet looking guitar, beautiful contrasts. well done. Let's hear it!
Herman

TonyinNYC
Posts: 1510
Joined: Sat Dec 17, 2011 9:00 pm

Re: Blackwood Classical with an Adi top My #11 guitar.

Post by TonyinNYC » Wed Jul 31, 2013 10:12 am

You have done another outstanding job. Beautiful wood, and a beautiful instrument.

John Parchem
Posts: 2750
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Blackwood Classical with an Adi top My #11 guitar.

Post by John Parchem » Wed Jul 31, 2013 12:31 pm

Thanks all for the positive encouragement throughout the build of this guitar.
I plan to post a video this weekend.

John Parchem
Posts: 2750
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Blackwood Classical with an Adi top My #11 guitar.

Post by John Parchem » Sat Aug 03, 2013 7:03 pm

I finally polished and properly setup my classical guitar. I had one funny issue when intonating the strings. The B string was playing way flat on the 12th fret. I was a bit nervous as I already had the string cutting near the top side of the saddle. I checked the saddle and the nut to make sure I did not have some weird change of angle back in the slot. Ultimately I changed the string with the same brand and it the intonation is right on. I will forget it ever happened. Here are only a few additional photos with the polished top and a link to the u-tube video. It sounds pretty good but I find playing up the neck it is a little more percussive than I would like, maybe it will open a bit, as it has just been set up. Red spruce is an odd top wood anyway for a classical. We will see what happens with time. Over all I am very happy with the results



A few final pictures.

Image

Image

Image

Image

Image

Post Reply