ZipFlex group buy anyone?

Selection -- purfling -- finger-board -- head-stock
Post Reply
TonyinNYC
Posts: 1510
Joined: Sat Dec 17, 2011 9:00 pm

ZipFlex group buy anyone?

Post by TonyinNYC » Tue Jun 18, 2013 10:21 am

It came up in another thread that there may be interest in a group buy of ZipFlex shell purfling. If you are not familiar with the product, you can check it out here:
http://www.advancedshelltech.com/Produc ... pFlex.html

There was a group buy on another forum a couple of years ago and they got the purchase price down to about $16 or so per strip. Keep in mind that these strips are 15" long and it will take 4 strips to do a soundboard. Abalone from the major supply houses costs just about $20 for 15" of straight strips and require more work to install than ZipFlex. 15" of Abalam strips from the major supply houses costs over $26 for the straight strips.
AST sells the ZipFlex for $20.50 if you buy 30 or more strips, but I know they have lowered the price for bigger orders in the past.

This thread is to gauge interest in a group buy. If you are interested, please state how many strips you would buy, and what type of shell. In the interest of simplicity, lets just stick to the .064" wide strips. Again, four strips will do a soundboard, so 8 will do the top and side purfling and probably 20 strips to do a full 45 style dreadnought.
Thanks,
Tony

Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: ZipFlex group buy anyone?

Post by Dave Bagwill » Tue Jun 18, 2013 10:30 am

Just so I'm clear: 4 strips @ $16 per strip to do the soundboard?
-Under permanent construction

TonyinNYC
Posts: 1510
Joined: Sat Dec 17, 2011 9:00 pm

Re: ZipFlex group buy anyone?

Post by TonyinNYC » Tue Jun 18, 2013 10:42 am

I don't know what the price will be until we get all of the interested parties to say they want some. If we can only muster 20 strips, the price will not be discounted from their website at all. At 30 strips, we would hit an automatic discount, as posted on their site.
But, yes. It takes 4 strips to do the soundboard.

Kevin in California
Posts: 2795
Joined: Mon Dec 19, 2011 4:19 pm

Re: ZipFlex group buy anyone?

Post by Kevin in California » Tue Jun 18, 2013 12:56 pm

For what it's worth, the shell I just used came from Duke Luthier, $15 for 36" (4 x 9" strips) it is just under 1/8" wide and .040" thick. If you want 2mm (about 3/32") it is $14. You can get curved pieces to for a bit more. Will take a little more work, but is a lot less expensive.

I think the Zipflex would be perfect for doing side purflings, and by the way, one 15" strip will do a rosette

I would be interested in some.

Kevin

Post Reply