My First Guitar Project KMG "D"

[John Parchem]

Good looking guitar! I also get some of my inlays from Andy. How did you finish the guitar?

[Charlie]

Hi John, Thanks for looking. I finished the guitar using the following, 0ne coat of Behlens Vinyl Sealer on top, back and sides, two coats of Hood Clear Quick Drying Wood Filler on the back and sides, and many coats of Reranch Nitrocellulose clear coat on the back and sides. The Vinyl Sealer and the Clear coat, were applied with rattle can, the wood filler was applied with a brush. The two coats of wood filler was not enough, should have been at least four or six coats. The finish was good, but there was still some pits. I hope this answers your question.

Chuck