Page 2 of 2

Re: Gritty / rough surface on Neck and lower bout

Posted: Mon Sep 11, 2017 9:50 pm
by Dave Bagwill
I finish the neck off of the body. Since I apply the Tru-Oil by hand, overspray and such is not a problem.

Re: Gritty / rough surface on Neck and lower bout

Posted: Tue Sep 12, 2017 6:29 pm
by Dan Austin
I think that I might try to just sand back the neck after spraying the lacquer and then apply the Tru-oil. When I spray I will minimize the amount of lacquer that lands on the neck.

Thanks,
Dan

Re: Gritty / rough surface on Neck and lower bout

Posted: Tue Sep 12, 2017 8:23 pm
by John Parchem
I would mask off the neck when finishing the body and then make off the body around the neck when finishing the neck. But I have no experience doing it that way.