backs and 'neck resets'

dimensional parameters, brace designs, brace layout and the logic behind those choices
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: backs and 'neck resets'

Post by ken cierp » Thu May 25, 2017 1:40 pm

If the humidity drops and precautions are not taken to prevent the sound board from drying out and shrinking --- no amount of carbon rods (placed anywhere) will prevent the bridge from rolling downward on the saddle side and the sound board from becoming concave around the sound hole and finger board extension. Both of which look like string tension on the neck tilted the neck block.

Dave Bagwill
Posts: 5955
Joined: Tue Dec 13, 2011 7:44 pm

Re: backs and 'neck resets'

Post by Dave Bagwill » Thu May 25, 2017 4:41 pm

Goes without saying. Humidity rules.
But that is not a knock against CF, right?
-Under permanent construction

ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: backs and 'neck resets'

Post by ken cierp » Fri May 26, 2017 11:54 am

Never tried CF rods for neck angle control (so I am clueless)-- but some of the assertions I have read regarding applications, in my mind do not add up from a geometric or structural cause and effect point of view.

Post Reply