Page 2 of 7
Re: KMG 000 First Build
Posted: Wed Feb 25, 2015 10:31 pm
by John Parchem
That rosette will look good.
Re: KMG 000 First Build
Posted: Wed Feb 25, 2015 11:23 pm
by ken cierp
Please ask if you are not sure about something you know the old adage measure twice cut once -- thank you
The Abalone gets two strips of BWB on the inside and two strips BWB on the out side. The black lines are slightly thinner on one edge, if placed properly the lines will be/look symmetrical.
Re: KMG 000 First Build
Posted: Fri Feb 27, 2015 11:52 pm
by John J
Glued the rosette last night. Thanks Ken for straighting me out on the order the rosette went together. Started on the top bracing. Glued the bridge plate and the first leg of the x brace.
Re: KMG 000 First Build
Posted: Sat Feb 28, 2015 10:58 pm
by John J
Moving along.
Re: KMG 000 First Build
Posted: Sat Feb 28, 2015 11:00 pm
by Dave Bagwill
And lookin' good :-)
Re: KMG 000 First Build
Posted: Sun Mar 01, 2015 2:59 pm
by John J
Using scraps cut from a flexible cutting board I confiscated proved and excellent barrier from my own ineptitude with a chisel.
Re: KMG 000 First Build
Posted: Sun Mar 01, 2015 11:31 pm
by John J
Top bracing finished.