Mahogay resaw mistake. Wood still usable?

Wood selection sound-boards, backs, sides, necks and trim
Post Reply
Herman
Posts: 1685
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:
Contact Herman

Re: Mahogay resaw mistake. Wood still usable?

Post by Herman » Wed May 14, 2014 1:22 pm

Ok, after planing the stuff flat I reglued them with 2 thin black veneers. With Ken's advise to make the middle one a bit thinner.
Now it is a quatered billet again. Phoenixwood.
Image

Could become 3 nice necks:
Image
Top
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: Mahogay resaw mistake. Wood still usable?

Post by Dave Bagwill » Wed May 14, 2014 1:55 pm

Good save Herman! What did you use for the black laminate?
-Under permanent construction
Top
Herman
Posts: 1685
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:
Contact Herman

Re: Mahogay resaw mistake. Wood still usable?

Post by Herman » Wed May 14, 2014 2:03 pm

0.5 mm (1/64") stained maple veneer. One square yard 10 bucks.
I'll use it for headstocks, purfling and accents. You'll see more of it on the cutawaybuild.
Top
Kevin in California
Posts: 2803
Joined: Mon Dec 19, 2011 4:19 pm

Re: Mahogay resaw mistake. Wood still usable?

Post by Kevin in California » Wed May 14, 2014 3:45 pm

Perfect!
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Mahogay resaw mistake. Wood still usable?

Post by ken cierp » Thu May 15, 2014 7:23 am

Yep -- very classy!

I get my ebonized veneer from here:

http://www.constantines.com/
Top
Post Reply

Return to “Materials Suitable for Acoustic Guitar Construction”