Re: harp ukulele project - Back on track!
Posted: Sun Aug 19, 2012 10:02 am
Excellent!
Acoustic Guitar Construction
John Parchem -- Started by Kenneth Cierpilowski
https://acousticguitarconstructionforum.com/
harp ukulele project - Gluing down the bridge...
https://acousticguitarconstructionforum.com/viewtopic.php?t=444
Page 8 of 15
Re: harp ukulele project - Back on track!
Posted: Mon Aug 20, 2012 9:35 am
The bindings are back on without the messed up top or purfling lines. Now I am really glad I changed the top!
Re: harp ukulele project - Back on track!
Posted: Mon Aug 20, 2012 9:54 am
Sweet, John.
Have you seen how Kathy's turned out? She did a marvelous job again.
Kevin
Have you seen how Kathy's turned out? She did a marvelous job again.
Kevin
Re: harp ukulele project - Back on track!
Posted: Mon Aug 20, 2012 9:59 am
Yes! I having been following her build. She did do a great job, her harp ukulele looks great.Kevininca wrote:Sweet, John.
Have you seen how Kathy's turned out? She did a marvelous job again.
Kevin
Re: harp ukulele project - Back on track!
Posted: Tue Aug 21, 2012 10:28 am
Thanks! John --- the fix turned out BEAUTIFULLY!!!! I bet you're really glad you did this. I don't know if I would have had as much patience and determination to do all that you did to make this right. Congratulations! Have fun on the finishing and final steps! Can't wait to see the finished product.
Re: harp ukulele project - Back on track!
Posted: Tue Aug 21, 2012 2:27 pm
Beautiful John! (Kathy Too!) Glad the fix worked out, and I too can't wait to hear it when its done!
Re: harp ukulele project - Back on track!
Posted: Thu Aug 23, 2012 8:20 pm
Thanks guys,
I have it back in the finishing room. I cleaned everything up frop filled with CA where needed and applied Z-Poxy to the sides and the back.
I should able able to spray starting this weekend. I also included a picture of the Uk assembled. Who could see the obvious non cosmetic mistake? I will probably leave it but if I am really bothered I could fix it as well.
I have it back in the finishing room. I cleaned everything up frop filled with CA where needed and applied Z-Poxy to the sides and the back.
I should able able to spray starting this weekend. I also included a picture of the Uk assembled. Who could see the obvious non cosmetic mistake? I will probably leave it but if I am really bothered I could fix it as well.