Page 6 of 9
Re: My KMG OM-28V Project
Posted: Sun Oct 06, 2013 5:31 pm
by Dennis in Anola
Finally, I'm OMward bound. A little scraping & sanding & it will be ready to paint.
Re: My KMG OM-28V Project
Posted: Mon Oct 07, 2013 10:01 am
by Kevin in California
Dennis, this one is coming together nicely.
Kevin
Re: My KMG OM-28V Project
Posted: Tue Oct 08, 2013 10:20 am
by TonyinNYC
Its looking very nice indeed!
Re: My KMG OM-28V Project
Posted: Mon Oct 14, 2013 2:58 pm
by Dennis in Anola
Today I applied a second coat of Zpoxy. I love working with this stuff. It is non critical to mix and has a long working time (at least at the temp in my basement). It also sands very easily without clogging the sandpaper much. I'm very pleased with the result. Can hardly wait to start spraying.
Re: My KMG OM-28V Project
Posted: Mon Oct 14, 2013 3:12 pm
by ken cierp
There's a lot said about the vanity woods -- but its hard to beat Rosewood and Curly Maple --- nice!!!
Re: My KMG OM-28V Project
Posted: Mon Oct 14, 2013 6:55 pm
by Dennis in Anola
And here's the neck. It only takes one coat to fill the neck if you apply the epoxy with a finger - use a nitril glove.
Re: My KMG OM-28V Project
Posted: Sun Oct 20, 2013 5:36 pm
by Dennis in Anola
15 coats of nitro and I'm happy with the result. I'll hang it up for three weeks to cure. I'll have it done in time for Christmas.