Acoustic Guitar Construction

Posted: **Tue Dec 23, 2014 7:48 pm**

Gunna be purty.

Posted: **Wed Dec 24, 2014 1:12 am**

A stunning back. I love using sap wood as the center strip. Daniel in the new year we should meet up. Currently I am still traveling around New Zealand having a great time.

Posted: **Mon Apr 13, 2015 10:48 am**

Work on the Ziricote 00-12 continues.

I finally took time to get the Grizzly 18" bandsaw running. I got it as a pile of parts and just had to machine a few pieces to get it up and running. Long term I want to put a Wood Slicer blade on it for higher quality resawing, but for now I'm just using one of the old blades that came with it for cutting some brace stock.

After cutting the brace stock to slightly oversize, and hand planed them down to the final 1/4" for use on the 00-12.

Posted: **Wed May 13, 2015 11:49 am**

Hand planing and scraping, I've brought the back down to final thickness, and ready for the back reinforcing strip.

Posted: **Wed May 13, 2015 12:16 pm**

Awsome, mr P.
Herman

Posted: **Thu May 14, 2015 12:57 am**

That zirc is going to be awesome

Posted: **Wed Jun 17, 2015 10:16 am**

I thinned the sides to right about .080" and scraped each side to a fine finish. I was honestly a littler nervous about bending the Ziricote, as some had warned that it can be brittle - but with just a light misting of water, wrapped in paper, and heated to 300 degree, the sides bent beautifully.

Final scraping:

Bent sides in the Mega Mold before trimming to length:

Acoustic Guitar Construction

Petrzelka #3 Ziricote and Sitka 00-12

Re: #3 Ziricote and Sitka 00-12

Re: #3 Ziricote and Sitka 00-12

Re: #3 Ziricote and Sitka 00-12

Re: #3 Ziricote and Sitka 00-12

Re: Petrzelka #3 Ziricote and Sitka 00-12

Re: Petrzelka #3 Ziricote and Sitka 00-12

Re: Petrzelka #3 Ziricote and Sitka 00-12