I got a picture of the inlay done by my friend Andy Birko. He also donated the fretboard, a faux bound ebony number, and the bridge. He does custom CNC work for luthiers and others. Great guy and I can't thank him enough!
Build Thread-Hurricane Sandy Giveaway Guitar
Re: Build Thread-Hurricane Sandy Giveaway Guitar
Thanks Kevin!
I got a picture of the inlay done by my friend Andy Birko. He also donated the fretboard, a faux bound ebony number, and the bridge. He does custom CNC work for luthiers and others. Great guy and I can't thank him enough!
I got a picture of the inlay done by my friend Andy Birko. He also donated the fretboard, a faux bound ebony number, and the bridge. He does custom CNC work for luthiers and others. Great guy and I can't thank him enough!
-
OnlineKevin in California
- Posts: 2796
- Joined: Mon Dec 19, 2011 4:19 pm
Re: Build Thread-Hurricane Sandy Giveaway Guitar
That looks nice!
-
John Parchem
- Posts: 2746
- Joined: Fri Dec 23, 2011 8:33 pm
- Location: Seattle
- Contact:
Re: Build Thread-Hurricane Sandy Giveaway Guitar
This is going to be a sweet looking guitar. The inlay looks good on the fret board.
-
OnlineKevin in California
- Posts: 2796
- Joined: Mon Dec 19, 2011 4:19 pm
-
Ray Ussery
- Posts: 662
- Joined: Wed Dec 21, 2011 12:51 am
Re: Build Thread-Hurricane Sandy Giveaway Guitar
Be-ut-EE full! What a great soundboard...where U get dat? OR did I miss it like usual?
Re: Build Thread-Hurricane Sandy Giveaway Guitar
Thanks Ray! The inlay looks like it has some gaps right now, but that is only because it is still flat, and not radiused and leveled to the board. I think it will look even nicer when it is leveled. The pocket is cut .002" larger than the inlay if I recall. Pretty tight tolerance if you ask me!RayRay wrote:Be-ut-EE full! What a great soundboard...where U get dat? OR did I miss it like usual?
The soundboard is Lutz spruce from Mario DaCosta. I don't think you missed it, but if you did, I don't blame you for not wanting to dig back through 7 pages of posts to find it!
For the last two nights, I have been very slowly drop filling a few gaps in the binding. I swear that before I began finishing, there were no gaps, but the lacquer has a way of finding them, and sinking into them, leaving them very visible to me eye, relatively speaking. In reality, the spots I need to fill are very small, but to me, as the builder, they look like Grand Canyon sized craters. I think I have them all filled now so I can leave the box to dry for a week.
Here is the kicker to this guitar though: It is supposed to be delivered by June 5th. The owner wishes to play it at his sister's wedding on the 6th. That leaves me three weeks to get the box sanded and buffed, fret and glue on the fret board, apply finish to the neck, and then get the thing set up. I will also need to put on the bridge!! It might be close, especially with the work I am doing at home. Things could get interesting.