Frets on the fretboard extension

Wood type -- slotting -- contouring -- fret installation
Post Reply
George
Posts: 139
Joined: Fri Dec 07, 2012 2:17 pm
Location: Texas

Frets on the fretboard extension

Post by George » Wed Jan 23, 2013 9:16 am

Is there any reason not to or problems I might run into if I install the frets on the extension before I glue the dovetail? I have a brace repair jack I can use to stabilize the top but it seems like it would be easier to install all the frets while the fretboard is off the guitar.

George
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Frets on the fretboard extension

Post by ken cierp » Wed Jan 23, 2013 9:41 am

You'll find out how Martin does it at about 2:45 into the video -- also take note of the comment at the beginning about rim sanding --- flat on the top slightly contoured on the back
Top
George
Posts: 139
Joined: Fri Dec 07, 2012 2:17 pm
Location: Texas

Re: Frets on the fretboard extension

Post by George » Wed Jan 23, 2013 9:56 am

Very good info. Thank you!

George
Top
Post Reply

Return to “Fingerboards”