Choosing back layout.

dimensional parameters, brace designs, brace layout and the logic behind those choices
Post Reply
Kenny Wiebusch
Posts: 103
Joined: Wed Mar 06, 2019 11:39 pm
Location: Southeast Texas

Choosing back layout.

Post by Kenny Wiebusch » Sun Nov 03, 2024 2:36 pm

I normally put the most quarter sawn part of the back plates in the middle. This is not normally the prettiest option, just the strongest. Just looking for other builders view on this.

Carl Dickinson
Posts: 149
Joined: Thu Jun 28, 2018 2:36 pm

Re: Choosing back layout.

Post by Carl Dickinson » Sun Nov 03, 2024 5:16 pm

I go for the looks. Sometimes a sapwood center really adds some bling.

John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Choosing back layout.

Post by John Parchem » Sun Nov 03, 2024 11:55 pm

With the back I go for looks as well. I also use sap wood stripes when they look good.

Herman
Posts: 1670
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:

Re: Choosing back layout.

Post by Herman » Mon Nov 04, 2024 4:23 am

Second that. When well thicknessed and braced, the strength of a back is not really an issue. At the moment I use a Madagascar Rosewood back with spalted sapwood in the middle. Very weak wood there, but impregnated with CA glue I did put it in the middle. Ha!
Herman

Post Reply