Are the errors was the browser or from the BB? When does it happen: attach, submit ...?
test
A new Dred guitar build started
-
- Posts: 2725
- Joined: Fri Dec 23, 2011 8:33 pm
- Location: Seattle
- Contact:
-
- Posts: 2770
- Joined: Mon Dec 19, 2011 4:19 pm
-
- Posts: 2770
- Joined: Mon Dec 19, 2011 4:19 pm
Re: A new Dred guitar build started
Worked this time first time
It's sporadic
It's sporadic
-
- Posts: 2770
- Joined: Mon Dec 19, 2011 4:19 pm
Re: A new Dred guitar build started
I got the top braces all carved....dang forgot to take a pic.
Scalloped X braces and lower bout braces.
I got the back and top glued to the rims yesterday and today. I have a nicely ringing box now.
Installed abalone dots on the fingerboard and put a 16ft radius on it with a sanding block.
Scalloped X braces and lower bout braces.
I got the back and top glued to the rims yesterday and today. I have a nicely ringing box now.
Installed abalone dots on the fingerboard and put a 16ft radius on it with a sanding block.
- Attachments
-
- 20241014_145417.jpg (335.87 KiB) Viewed 19 times
-
- 20241015_160113.jpg (305.18 KiB) Viewed 19 times
-
- 20241015_160125.jpg (206.61 KiB) Viewed 19 times
-
- 20241015_160132.jpg (229.91 KiB) Viewed 19 times
-
- 20241015_163054.jpg (234.63 KiB) Viewed 19 times
-
- 20241015_163103.jpg (282.38 KiB) Viewed 19 times
-
- Posts: 2770
- Joined: Mon Dec 19, 2011 4:19 pm
Re: A new Dred guitar build started
All trimmed flush today with the palm router. Now I need to level the sides. I have some areas with low spots....from the bending. I use a scraper and a flat long hardwood block covered with 80 grit paper to do this
- Attachments
-
- 20241016_155050.jpg (260.25 KiB) Viewed 8 times
-
- 20241016_155057.jpg (318.93 KiB) Viewed 8 times