An easy way to control the bolts when fitting the neck

Dave Bagwill · Post by **Dave Bagwill** » Thu Apr 27, 2017 5:27 pm

I expect that everyone and everyone's dog has already figured this, or something even easier, way to hold the bolts through the soundhole and screw into the inserts. JUst in case, I will attach a 1,000 word-worth picture.

Dave Bagwill · Post by **Dave Bagwill** » Fri Apr 28, 2017 1:01 am

Oh and by the way - I turn the bit holder/bit/bolt with my hand, not with a drill. If that wasn't clear.

Dave Bagwill · Post by **Dave Bagwill** » Sat Aug 19, 2017 3:23 pm

Okay that helped but this is better:

John Parchem · Post by **John Parchem** » Sat Aug 19, 2017 9:19 pm

cool!

ken cierp · Post by **ken cierp** » Sun Aug 20, 2017 10:38 am

Allen head driver bits are available that will fit that magnetic adapter.

Acoustic Guitar Construction

An easy way to control the bolts when fitting the neck

An easy way to control the bolts when fitting the neck

Re: An easy way to control the bolts when fitting the neck

Re: An easy way to control the bolts when fitting the neck

Re: An easy way to control the bolts when fitting the neck

Re: An easy way to control the bolts when fitting the neck