An easy way to control the bolts when fitting the neck
-
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
An easy way to control the bolts when fitting the neck
I expect that everyone and everyone's dog has already figured this, or something even easier, way to hold the bolts through the soundhole and screw into the inserts. JUst in case, I will attach a 1,000 word-worth picture.
- Attachments
-
- DSC02061.JPG (131.53 KiB) Viewed 1453 times
-Under permanent construction
-
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: An easy way to control the bolts when fitting the neck
Oh and by the way - I turn the bit holder/bit/bolt with my hand, not with a drill. If that wasn't clear.
-Under permanent construction
-
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: An easy way to control the bolts when fitting the neck
Okay that helped but this is better:
- Attachments
-
- DSC02096.JPG (146.1 KiB) Viewed 1187 times
-
- DSC02095.JPG (161.52 KiB) Viewed 1187 times
-Under permanent construction
-
- Posts: 2749
- Joined: Fri Dec 23, 2011 8:33 pm
- Location: Seattle
- Contact:
Re: An easy way to control the bolts when fitting the neck
Allen head driver bits are available that will fit that magnetic adapter.
ken cierp
http://www.kennethmichaelguitars.com/
Store Front
http://www.cncguitarproducts.com/
KMG Guitar Kit Information
http://www.kennethmichaelguitars.com/ki ... ckage.html
http://www.kennethmichaelguitars.com/
Store Front
http://www.cncguitarproducts.com/
KMG Guitar Kit Information
http://www.kennethmichaelguitars.com/ki ... ckage.html