Here again!

Things that matter and not -- Just keep it wholesome
Kevin in California
Posts: 2804
Joined: Mon Dec 19, 2011 4:19 pm

Re: Here again!

Post by Kevin in California » Wed Mar 02, 2016 12:38 pm

Hey Ray! Howdy, good to see you back. Sounds like you are doing much better??????

Herman
Posts: 1685
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:

Re: Here again!

Post by Herman » Wed Mar 02, 2016 3:58 pm

Hey Ray, Nice to hear from you again. Welcome back Texas boy.
Herman

John J
Posts: 359
Joined: Fri Nov 14, 2014 4:30 pm
Location: Saint Paul, Minnesota

Re: Here again!

Post by John J » Tue Mar 08, 2016 12:46 pm

Ray, as promised here's my tiny shop. It's the corner of my basement. Working around a water heater, furnace and a bathroom jutting on the end. I use an overhead shelf to store my mega mold and current in progress parts. Up between the joists I store my wood. Hope it gives you some ideas.
Attachments
Entrance.
Entrance.
image.jpeg (171.26 KiB) Viewed 1001 times
Spindle sander. Fan/filter helps with dust (needs a cleaning!).
Spindle sander. Fan/filter helps with dust (needs a cleaning!).
image.jpeg (166.14 KiB) Viewed 1001 times
Main work area. 38" height helps for back fatigue. Assembly and finishing done here.
Main work area. 38" height helps for back fatigue. Assembly and finishing done here.
image.jpeg (117.15 KiB) Viewed 1001 times
Clamp storage. Screws/bolts etc.
Clamp storage. Screws/bolts etc.
image.jpeg (152.28 KiB) Viewed 1001 times
Drill press and belt sander. Storage underneath for bender.
Drill press and belt sander. Storage underneath for bender.
image.jpeg (159.79 KiB) Viewed 1001 times
HB workbench that I can pull out at an angle to use the end clamp (with my guitar body holder).
HB workbench that I can pull out at an angle to use the end clamp (with my guitar body holder).
image.jpeg (116.16 KiB) Viewed 1001 times
Flip table with table saw/router table, drum sander and band saw. Flip table and drum sander are on casters.
Flip table with table saw/router table, drum sander and band saw. Flip table and drum sander are on casters.
image.jpeg (96.18 KiB) Viewed 1001 times
Overhead shelf and rafter storage.
Overhead shelf and rafter storage.
image.jpeg (75.91 KiB) Viewed 1001 times
JJ
Learning every day. And having fun doing it.

Kevin in California
Posts: 2804
Joined: Mon Dec 19, 2011 4:19 pm

Re: Here again!

Post by Kevin in California » Tue Mar 08, 2016 4:53 pm

You've got a lot of stuff in there John, my workshop-in-the-garage is pretty much the same.

johnnyg
Posts: 60
Joined: Wed Jun 17, 2015 3:12 pm

Re: Here again!

Post by johnnyg » Wed Mar 09, 2016 3:15 pm

i would like to know a little bit more about the thickness sander you built. Are you using the table saw motor to power it? Is the design in your head or do you have some plans for it?

Thanks!
- johnnyg

ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Here again!

Post by ken cierp » Wed Mar 09, 2016 3:43 pm

i would like to know a little bit more about the thickness sander you built. Are you using the table saw motor to power it? Is the design in your head or do you have some plans for it?

Thanks!
I believe that plan was posted back here:

http://acousticguitarconstructionforum. ... f=5&t=2571

johnnyg
Posts: 60
Joined: Wed Jun 17, 2015 3:12 pm

Re: Here again!

Post by johnnyg » Wed Mar 09, 2016 4:13 pm

Thanks Ken, i didn't realize it was the same plan. I am starting on it this weekend. I was intrigued by the use of the table saw. Is it just using the table as place to set it or is it somehow using the table saw motor.
- johnnyg

Post Reply