Need a woodworking tip please

Things that matter and not -- Just keep it wholesome
Post Reply
Andy Birko
Posts: 5
Joined: Thu Jun 26, 2014 8:18 am
Contact:
Contact Andy Birko

Re: Need a woodworking tip please

Post by Andy Birko » Thu Sep 25, 2014 3:57 pm

That angle aluminum you used to sand your bearing surface....just epoxy it on to the top of the wood and voila - you now have a much smoother aluminum bearing surface. Many folks have made DIY CNC machines using similar techniques.
Andy Birko
My Bandura Making Blog: http://banduramaker.blogspot.com
Top
Dave Bagwill
Posts: 5952
Joined: Tue Dec 13, 2011 7:44 pm

Re: Need a woodworking tip please

Post by Dave Bagwill » Thu Sep 25, 2014 4:10 pm

Well, crap. I should have thought of that.
So I'll pretend that I did, and go out and do it! :-)
Thanks Andy.
-Under permanent construction
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Need a woodworking tip please

Post by ken cierp » Thu Sep 25, 2014 9:01 pm

Way to go Andy! I am sure the aluminum tracks will be a huge improvement. --- Oh yeah, mmmm, good thinking Dave
Top
Post Reply

Return to “"Shoot the Breeze"”