French polish repair

Types of finish coatings -- application tools -- application methods
John Link
Posts: 800
Joined: Tue Nov 27, 2012 8:01 pm
Location: Kalamazoo, MI

Re: French polish repair

Post by John Link » Fri Aug 01, 2014 5:03 pm

Renee,

You are the final judge of what looks so bad you can't stand it. Looking only at the photo, this does not look that bad to me. I've seen $100k vintage gits that look much much worse.

What I want to warn you about is simple, though. Should you undertake this repair, it is easy for me to imagine you might get into problems that lead to worse outcomes than what you have now. It is much easier to finish a new guitar than it is to repair one with a damaged finish.

So be careful and good luck.

John

Renee Labordus
Posts: 68
Joined: Mon Apr 28, 2014 11:39 am

Re: French polish repair

Post by Renee Labordus » Fri Aug 01, 2014 5:28 pm

John Link wrote:Renee,

You are the final judge of what looks so bad you can't stand it. Looking only at the photo, this does not look that bad to me. I've seen $100k vintage gits that look much much worse.

What I want to warn you about is simple, though. Should you undertake this repair, it is easy for me to imagine you might get into problems that lead to worse outcomes than what you have now. It is much easier to finish a new guitar than it is to repair one with a damaged finish.

So be careful and good luck.
That occurred to me as well John.
Would it be easier if I lacquered it, instead of FP? After prepping the surface as new of course.

Renee Labordus
Posts: 68
Joined: Mon Apr 28, 2014 11:39 am

Re: French polish repair

Post by Renee Labordus » Fri Aug 01, 2014 7:41 pm

Thank you John.

ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: French polish repair

Post by ken cierp » Fri Aug 01, 2014 9:39 pm

I've searched for years for "blind test results" that have verified that a French Polish top actually sounds better than lacquer. As a matter of fact there are premier classic makers that use brushed applied "varnish" Kinkead uses Truoil, Doolin uv cured lacquer, Greven has his own process etc. I just don't agree with the idea that not French Polishing will result in an audible detriment to a guitar classic or other. I certainly see that FB is mainstream in classic guitar marketing. Sorry I have to be the devil's advocated on this issue --- FP is nice but if properly applied so are the other coatings including the modern water bore products.

ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: French polish repair

Post by ken cierp » Sat Aug 02, 2014 4:41 pm

As a follow up to my last post regarding blind tests --- of course a blind test comparing a "carbon fiber violin" to a Stradivarius would be for comedic reasons only -- almost sacrilegious, but is has been done and yielded some shocking results. This is a good read and evidence to me why its difficult to separate the myths from reality when it comes to comparisons of the subjective elements regarding musical instrument excellence.

http://blogs.discovermagazine.com/notro ... -new-ones/

Renee Labordus
Posts: 68
Joined: Mon Apr 28, 2014 11:39 am

Re: French polish repair

Post by Renee Labordus » Mon Aug 04, 2014 1:45 pm

Repair as good as it is going to get.
Attachments
IMG_0244.jpg
IMG_0244.jpg (59.23 KiB) Viewed 858 times
IMG_0243.jpg
IMG_0243.jpg (51.07 KiB) Viewed 858 times

Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: French polish repair

Post by Dave Bagwill » Mon Aug 04, 2014 2:02 pm

That's an excellent repair, to my eye at least! Good job.
-Under permanent construction

Post Reply