Steve's KMG 000-12 kit
Re: Steve's KMG 000-12 kit
Is this one still n a holding pattern?
ken cierp
http://www.kennethmichaelguitars.com/
Store Front
http://www.cncguitarproducts.com/
KMG Guitar Kit Information
http://www.kennethmichaelguitars.com/ki ... ckage.html
http://www.kennethmichaelguitars.com/
Store Front
http://www.cncguitarproducts.com/
KMG Guitar Kit Information
http://www.kennethmichaelguitars.com/ki ... ckage.html
-
Dave Bagwill
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: Steve's KMG 000-12 kit
The box is together, the fb is fretted and glued on, another day's work and we will be ready to finish - BUT I'm having the shop/barn roofed this week so the shop is unavailable. And Steve was gone for two weeks.
In a word, Yep, on hold but close. Steve is now deciding whether to spray nitro (he has a lot of experience spraying) or going with the hand-rubbed finish.
In a word, Yep, on hold but close. Steve is now deciding whether to spray nitro (he has a lot of experience spraying) or going with the hand-rubbed finish.
-Under permanent construction
-
Dave Bagwill
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: Steve's KMG 000-12 kit
A few quick pix. Steve has done an outstanding job.
Eric, who is building a scratch ziricote/spruce guitar, had a nasty motorcycle accident but is ok and should be back next week.
Eric, who is building a scratch ziricote/spruce guitar, had a nasty motorcycle accident but is ok and should be back next week.
- Attachments
-
- DSCN1530.jpeg (66.23 KiB) Viewed 922 times
-
- DSCN1532.jpeg (85.69 KiB) Viewed 922 times
-
- IMG_0635.jpeg (72.14 KiB) Viewed 922 times
-Under permanent construction
-
Kevin in California
- Posts: 2804
- Joined: Mon Dec 19, 2011 4:19 pm
-
Dave Bagwill
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: Steve's KMG 000-12 kit
Just catching up on posting a couple of pix earlier in the process.
A clamping pic; two pics of routing the binding channels top and bottom using the KMG table-top routing system - Steve took right to it. It's a great system.
A clamping pic; two pics of routing the binding channels top and bottom using the KMG table-top routing system - Steve took right to it. It's a great system.
- Attachments
-
- DSC01163.JPG (139.77 KiB) Viewed 463 times
-
- DSC01161.JPG (133.82 KiB) Viewed 463 times
-
- DSC01156.JPG (138.11 KiB) Viewed 463 times
-Under permanent construction
-
Dave Bagwill
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: Steve's KMG 000-12 kit
Oh and speaking of Steve - he mentioned that he has a neighbor/friend who has a metal working setup in his home shop - I sent a picture of the stewmac circle/rosette cutting device - I already had the router base for the dremel - and Steve got some aluminum and the neighbor made the device for me and it is SWEET! The machining is fantastic, smooth and very professional.
They would not let me pay for it, dang!! :-)
Much appreciated.
They would not let me pay for it, dang!! :-)
Much appreciated.
- Attachments
-
- DSC01166.JPG (160.38 KiB) Viewed 463 times
-
- DSC01165.JPG (143.38 KiB) Viewed 463 times
-Under permanent construction
-
Dave Bagwill
- Posts: 5951
- Joined: Tue Dec 13, 2011 7:44 pm
Re: Steve's KMG 000-12 kit
Steve is filling a small binding gap; cutting the truss rod hole; and a pic of the neck bolted on.
- Attachments
-
- DSC01173.JPG (192.33 KiB) Viewed 448 times
-
- DSC01174.JPG (169.53 KiB) Viewed 448 times
-
- DSC01175.JPG (206.87 KiB) Viewed 448 times
-Under permanent construction