Rigid Rim construction -- something different

Solid or Laminated sides? Ribbon lining style (kerfing) - rim profiling, contouring and the logic for those choices
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Re: Rigid Rim construction -- something different

Post by Dave Bagwill » Tue Feb 04, 2014 6:11 pm

Preston's guitar has a rounder tone, fuller in the 600-800 mhz range, which is tricky, because if you overdo it, you get a nasal quality, if you underdo it, you get a scooped sound. Preston pretty much nailed it imo, which gives that fullness.
-Under permanent construction

John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Rigid Rim construction -- something different

Post by John Parchem » Tue Feb 04, 2014 6:22 pm

I like both guitars. If the Mitcheletti is like the classical rigid rim on the web site then it is a size smaller. I think the Mitcheletti has a cleaner sound the bass sounds less hollow than the Petterson as recorded. I agree with Ken that it is better suited as a jazz or contemporary finger picking guitar.

John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Rigid Rim construction -- something different

Post by John Parchem » Tue Feb 04, 2014 6:26 pm

I listened to the clip Ray posted the rigid rim steel string sound a like his smaller size guitar "The Kestral" not like his jumbo sized guitar.

Tim Benware
Posts: 1489
Joined: Thu Dec 22, 2011 1:22 pm
Location: Asheboro, NC

Re: Rigid Rim construction -- something different

Post by Tim Benware » Tue Feb 04, 2014 8:06 pm

If I closed my eyes and listened I would have said it was an acoustic archtop jazz guitar and not a very good one at that.
I've "Ben-Had" again!
Tim Benware
Creedmoor, NC

ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Rigid Rim construction -- something different

Post by ken cierp » Tue Feb 04, 2014 9:44 pm

Looks pretty cool, likely a little more comfortable -- but than you'd be adding 2" !!! all around the perimeter of an already comfortable OM/000 -- but for all the extra work my old ears just can't pick up any musical improvement.

John Parchem
Posts: 2746
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:

Re: Rigid Rim construction -- something different

Post by John Parchem » Tue Feb 04, 2014 11:15 pm

I read his notes on the website for the first classical rigid rim. He stated that he made it to put a small body instrument in a large guitar body because a big guitar player wanted a bigger classical and he did not think it would sound right. So the inside body on that instrument is the size of a normal classical.

John Link
Posts: 800
Joined: Tue Nov 27, 2012 8:01 pm
Location: Kalamazoo, MI

Re: Rigid Rim construction -- something different

Post by John Link » Wed Feb 05, 2014 12:20 am

Interesting comparison. My ear found them all remarkably similar. But for reasons I cannot put in words, it "went for" the smaller instrument. Not by an overwhelming margin, but that was my ear's preference. Might be EQ. They all sounded good.

I can think of reasons a "rigid rim" might cause, say, increased volume and/or a greater range of response but did not notice anything like that in comparing the sounds.
John

Post Reply