humidity

Things that matter and not -- Just keep it wholesome
Post Reply
peter havriluk
Posts: 990
Joined: Sun Jul 29, 2012 12:30 pm
Location: Granby, CT

humidity

Post by peter havriluk » Mon Jan 27, 2014 9:30 pm

Topic of the season for those of us who have finished guitars. Hard to do in New England winters. I'm wondering if there is any benefit derived from zipping the encased guitar, with humidity enhancers inside the case, into a vinyl suit bag so as to impede the case's and hence the guitar's respiration with the outside world? I've never heard the suggestion, and that suggests that it's either a really dumb idea or it doesn't work, or of course, everybody does it, why even bring the topic into discussion.

Opinions and reactions are invited. So are humidification ideas that work.

Thanks, folks.
Peter Havriluk

ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: humidity

Post by ken cierp » Mon Jan 27, 2014 10:45 pm

Great to construct guitars when the humidity is low about 40% is ideal -- bad to construct (assembly and glue ups) guitars when the humidity is high. The worry is when parts are glued up with a high moisture content -- when the water leaves the wood it shrinks -- boom cracks. That said I am not sure what you are asking about?

peter havriluk
Posts: 990
Joined: Sun Jul 29, 2012 12:30 pm
Location: Granby, CT

Re: humidity

Post by peter havriluk » Mon Jan 27, 2014 11:27 pm

Ken, here's where my thought(?) process was going:

Humid air is less dense than dry air. I think a guitar case, being unsealed from the elements, if there's humidity enhancers inside the case, will be invaded by denser, dry air and the humidification attempts inside the case compromised. My notion was to insert the guitar/case in a garment bag so that it won't be breathing in the dry surrounding air, allowing the moisture devices inside the case to do a better job raising the relative humidity inside the case. Not a big deal, but if an improvement of humidification can be obtained by using a relatively inexpensive garment bag, the moisture level of the guitar would be a bit higher. But I've not seen anyone mention this notion, and I was putting it out to the group for a reasonability check.
Peter Havriluk

Tim Benware
Posts: 1489
Joined: Thu Dec 22, 2011 1:22 pm
Location: Asheboro, NC

Re: humidity

Post by Tim Benware » Mon Jan 27, 2014 11:55 pm

I think you could possibly get it too high that way. Better to invest in a humidifier (winter) and a dehumidifier (summer). Currently I am going through about 4 gals of water a day to keep my shop between 40-45% RH.
I've "Ben-Had" again!
Tim Benware
Creedmoor, NC

peter havriluk
Posts: 990
Joined: Sun Jul 29, 2012 12:30 pm
Location: Granby, CT

Re: humidity

Post by peter havriluk » Tue Jan 28, 2014 12:06 am

Humidifier's already in the room where the guitar lives. Noisy little bugger.
Peter Havriluk

Eric_K
Posts: 139
Joined: Fri Dec 16, 2011 8:13 pm

Re: humidity

Post by Eric_K » Tue Jan 28, 2014 1:04 pm

I had to save up and install a whole-house dehumidifier in my house to get the humidity down to 50%. I started a new guitar two weekends ago. I couldn't glue the braces last weekend because the humidity dropped below 40% for the first time since I started tracking it. My neighbors keep humidifiers in their guitars in cases, the hard ones, not the vinyl ones. The one neighbor says that he fills his twice a week.

Eric

Daniel P
Posts: 519
Joined: Tue May 14, 2013 11:00 am
Location: the great Pacific NW

Re: humidity

Post by Daniel P » Tue Jan 28, 2014 3:53 pm

We've got all the humidity you need here the PNW

Post Reply