OK I'm pumped!

Tim Benware · Post by **Tim Benware** » Fri Oct 25, 2013 7:20 pm

Got the door openings painted and the electrical work done, had to tear out a bit of sheetrock to run the wire. So here are a few before shots so there will be some after comparisons.

Lonnie B · Post by **Lonnie B** » Fri Oct 25, 2013 7:31 pm

Tim that is totally awesome. I guess you could say a dream one true. Would be for me anywAy. Good for you. You go Boy!!

Kevin in California · Post by **Kevin in California** » Fri Oct 25, 2013 7:35 pm

Coming along nicely Tim, you are going to have a great shop.

Kevin

Tim Benware · Post by **Tim Benware** » Tue Oct 29, 2013 6:42 pm

So the electrical inspectors came yesterday and told me the new code required TWO visible grounds and as the one on the shop was buried into the foundation I had to drive two more. For any that have not done this the rods are 8 feet long and must be driven flush to the ground. WHEW!

Well, the inspector came back today and everything passed, so I insulated the wall and sheet rocked it in. I'm getting to old for this s**t!!!!