Saddle slot depth

Materials used - making - placing - gluing to the sound-board <-----<<< got to get this right!
Post Reply
Dave Bagwill
Posts: 5951
Joined: Tue Dec 13, 2011 7:44 pm

Saddle slot depth

Post by Dave Bagwill » Mon Jul 01, 2013 1:43 pm

What is your method of determining a saddle slot depth?
-Under permanent construction
Top
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Re: Saddle slot depth

Post by ken cierp » Mon Jul 01, 2013 3:56 pm

The Martin belly bridge goes down about .24" deep and they average .36" thick in the center --- Gibson bridges go down about .18" and they average .25 at the center. So it varies. You don't want the saddle tipping toward the nut. And you don't want the slot so deep as to allow the front portion to crack and peel off.
Top
Kevin in California
Posts: 2801
Joined: Mon Dec 19, 2011 4:19 pm

Re: Saddle slot depth

Post by Kevin in California » Mon Jul 01, 2013 7:52 pm

I go down so I'm 1/8" off the bottom. For a approx. 3/8" bridge this comes out pretty good for me

Kevin
Top
Herman
Posts: 1680
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:
Contact Herman

Re: Saddle slot depth

Post by Herman » Mon Jul 08, 2013 3:02 pm

Kevin +1. I go to 3mm from the bottom (=about1/8")
Herman
Top
Post Reply

Return to “Bridges”