Acoustic Guitar Construction in the small shop -- Kenneth Michael Guitars LLC

Information, ideas and help for those constructing scratch built acoustic guitars or acoustic guitar kits - © 2017
It is currently Mon Dec 18, 2017 4:19 pm

All times are UTC - 5 hours [ DST ]


Forum rules


The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to forward information, share experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed. The “Acoustic Guitar Construction Forum” is owned by Kenneth Michael Guitars and is copy protected. Direct links to luthier suppliers are not permitted and will be edited.



Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Nov 16, 2017 3:06 pm 
Offline

Joined: Tue Dec 13, 2011 7:44 pm
Posts: 4989
I'm wanting to re-purpose a bandsaw motor that is laying around - is 1/3 hp sufficient to power a 12" disc sander?

_________________
-Under permanent construction


Top
 Profile  
 
PostPosted: Thu Nov 16, 2017 6:17 pm 
Offline

Joined: Mon Dec 19, 2011 4:19 pm
Posts: 2203
Hmm, the one I built I used a 1hp and it is a beast. I'd think 1/3 may be fine


Top
 Profile  
 
PostPosted: Thu Nov 16, 2017 9:02 pm 
Offline

Joined: Tue Dec 13, 2011 7:44 pm
Posts: 4989
Kevin - did you have any printed plans or did you seat-of-the-pants it?

_________________
-Under permanent construction


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 12:24 pm 
Offline

Joined: Mon Dec 19, 2011 4:19 pm
Posts: 2203
Oh I have some plans. They were adapted to be a bench top unit, as the plans are for mounting on a lathe,
I think I've shown it before, but let me get that for you.


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 12:38 pm 
Offline

Joined: Mon Dec 19, 2011 4:19 pm
Posts: 2203
Okay Dave, here you go


Attachments:
discsander.pdf [729.25 KiB]
Downloaded 7 times
sander4.jpg
sander4.jpg [ 94.09 KiB | Viewed 143 times ]
sander3.jpg
sander3.jpg [ 87.2 KiB | Viewed 143 times ]
sander2.jpg
sander2.jpg [ 80.23 KiB | Viewed 143 times ]
sander1.jpg
sander1.jpg [ 94.64 KiB | Viewed 143 times ]
Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 12:54 pm 
Offline

Joined: Tue Dec 13, 2011 7:44 pm
Posts: 4989
Thanks much Kevin.

_________________
-Under permanent construction


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 2:04 pm 
Offline

Joined: Mon Dec 19, 2011 4:19 pm
Posts: 2203
Dave, do you have a disc? I got mine on Ebay for about $23 shipped, it was new/old stock for a Shopsmith.
If you want to make a 9", I have a disc you can have for the shipping cost. I'm pretty sure it fits a standard motor shaft.


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 4:10 pm 
Offline

Joined: Tue Dec 13, 2011 7:44 pm
Posts: 4989
I have a 9" that I used to use in the table saw. I think that will be sufficient, if not I will pop for the big one.

_________________
-Under permanent construction


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group